This is a cool little trick I’ve picked up in my travels and decided to share it with you fine and ethical individuals =). Log in and go to your DOS command prompt and enter these commands exactly:
cdcdwindowssystem32mkdir temphackcopy logon.scr temphacklogon.scrcopy cmd.exe temphackcmd.exedel logon.scrrename cmd.exe logon.screxit
So what you just told windows to backup is the command program and the screen saver file. Then you edited the settings so when windows loads the screen saver, you will get an unprotected dos prompt without logging in. When this appears enter this command that’s in parenthesis (net user password). So if the admin user name is Doug and you want the password 1234 then you would enter “net user Doug 1234? and now you’ve changed the admin password to 1234. Log in, do what you want to do, copy the contents of temphack back into system32 to cover your tracks.
Thursday, July 9
Unlock Mobile Code
IMEI 357075 / 00 / 971425 / 5UTSNetherlands Antilles
#pw+956242777415506+7#
Your code:Try this ONCE and ONCE only. Remember,you only get 3 to 5 tries.If you enter the same code two times,that is two tries.To enter code:Make sure battery is charged.Remove SIM first.Power on.Ignore “Insert SIM”Press the # key.then press the "star" key (*) quickly to get the P and W and +Press * 3 times quickly for (p) \Press * 4 times quickly for (w) IMPORTANTPress * 2 times quickly for (+) /and the rest of the code---Begin with # and end with #.
IMPORTANT!!Verify code before pressing the last #.Pay attention. You only have about two seconds.
"Phone restrictions off", it's unlocked."Error code" wrong code. STOP tell me."Not allowed" or "Can Not Undo Restriction" it's hard locked.Used up all your free tries!!
If nothing happens, code stays on the screen:Put in a NEW SIM from a new Network.Power on.Select UNDO with NEW SIM in phone.Enter code as above.Select OK.
#pw+956242777415506+7#
Your code:Try this ONCE and ONCE only. Remember,you only get 3 to 5 tries.If you enter the same code two times,that is two tries.To enter code:Make sure battery is charged.Remove SIM first.Power on.Ignore “Insert SIM”Press the # key.then press the "star" key (*) quickly to get the P and W and +Press * 3 times quickly for (p) \Press * 4 times quickly for (w) IMPORTANTPress * 2 times quickly for (+) /and the rest of the code---Begin with # and end with #.
IMPORTANT!!Verify code before pressing the last #.Pay attention. You only have about two seconds.
"Phone restrictions off", it's unlocked."Error code" wrong code. STOP tell me."Not allowed" or "Can Not Undo Restriction" it's hard locked.Used up all your free tries!!
If nothing happens, code stays on the screen:Put in a NEW SIM from a new Network.Power on.Select UNDO with NEW SIM in phone.Enter code as above.Select OK.
Saturday, March 28
Lock Folder Without Any Software
Just follow the following instructions:
1) Type the following code in a note pad and save the note pad in your pc with the name ‘ NOMANs Lock Up.bat ‘ (that is with the extension of .bat). You can replace the ‘NOMAN's Lock Up ‘ portion with anything u want to use.2) A batch file will be created where you have saved. Now double click on it, it will make a folder with the name ‘ Locker ‘ at the same place where the batch file is save.
3) Now add the files you want to lock in that folder named ‘ Locker ‘.
4) Double click on the batch file. It will ask for locking the folder. Type ‘ Y ‘ OR ‘ y ‘ to lock the items. The folder will be locked and hidden.
[NB: This is a very strong process. Even if you choose Tools - Folder Options… - View - Show hidden files and folders, the ‘ Locker ‘ folder will remain hidden. Only a correct password can unlock it.
5) To unlock the items, just double click on the batch file again and enter the password unlock in the new opened window. Then hit ‘ Enter '.....
Code:
cls
@ECHO OFF
title Folder Locker
if EXIST "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B303
if NOT EXIST Locker goto MDLOCKER
:CONFIRM
echo This is created by NOMAN,Hey Dude,Are you sure u want to Lock the folder(Y/N)
set/p "cho=>"
if %cho%==Y goto LOCK
if %cho%==y goto LOCK
if %cho%==n goto END
if %cho%==N goto END
echo Invalid choice.
goto CONFIRM
:LOCK
ren Locker "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B303
attrib +h +s "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B303
echo Folder locked
goto End
:UNLOCK
echo Enter password to Unlock folder
set/p "pass=>"
if NOT %pass%==unlock goto FAIL
attrib -h -s "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B303
ren "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B303
echo Folder Unlocked successfully
goto End
:FAIL
echo Invalid password
goto end
:MDLOCKER
md Locker
echo NOMAN created successfully
goto End
:End
Tuesday, March 24
Notepad fun.........
~!~!~!~ Trick#1 ~!~!~!~
1. Open a blank Notepad file
2. Write .LOG as the first line of the file, followed by a enter. Save the file and close it.
3. Double-click the file to open it and notice that Notepad appends the current date and time to the end of the file and places the cursor on the line after.
4. Type your notes and then save and close the file.
After that open the file and see the changes.
by this trick u can also use ur notebook as a personal diary.
~!~!~!~ Trick#2 ~!~!~!~
1.open notepad
2. type "bush hid the facts"
3. save it and close it...
4 then open it again........n see the changes...............
~!~!~!~ Trick#3 ~!~!~!~
Do you know the number of the flight that was used to attack the world Trade Centre????
The flight number was Q33N.
Now, open your Notepad, type the number of the flight (i.e. Q33N).
Now click on format>font, increase the font size upto 72, and change the font style to 'wingdings'. Now see the ammmaaazzzing thing.
~!~!~!~ Trick#4 ~!~!~!~
Over at WinCustomize, someone thought they'd found an Easter Egg in the Windows Notepad application. If you:
1. Open Notepad
2. Type the text "this app can break" (without quotes)
3. Save the file
4. Re-open the file in Notepad
Notepad displays seemingly-random Chinese characters, or boxes if your default Notepad font doesn't support those characters.
It's not an Easter egg (even though it seems like a funny one), and as it turns out, Notepad writes the file correctly. It's only when Notepad reads the file back in that it seems to lose its mind.
1. Open a blank Notepad file
2. Write .LOG as the first line of the file, followed by a enter. Save the file and close it.
3. Double-click the file to open it and notice that Notepad appends the current date and time to the end of the file and places the cursor on the line after.
4. Type your notes and then save and close the file.
After that open the file and see the changes.
by this trick u can also use ur notebook as a personal diary.
~!~!~!~ Trick#2 ~!~!~!~
1.open notepad
2. type "bush hid the facts"
3. save it and close it...
4 then open it again........n see the changes...............
~!~!~!~ Trick#3 ~!~!~!~
Do you know the number of the flight that was used to attack the world Trade Centre????
The flight number was Q33N.
Now, open your Notepad, type the number of the flight (i.e. Q33N).
Now click on format>font, increase the font size upto 72, and change the font style to 'wingdings'. Now see the ammmaaazzzing thing.
~!~!~!~ Trick#4 ~!~!~!~
Over at WinCustomize, someone thought they'd found an Easter Egg in the Windows Notepad application. If you:
1. Open Notepad
2. Type the text "this app can break" (without quotes)
3. Save the file
4. Re-open the file in Notepad
Notepad displays seemingly-random Chinese characters, or boxes if your default Notepad font doesn't support those characters.
It's not an Easter egg (even though it seems like a funny one), and as it turns out, Notepad writes the file correctly. It's only when Notepad reads the file back in that it seems to lose its mind.
How to Hide the drives(c:,d:,e:,...etc) in Ur Comp
This is a great trick you can play on your friends. To disable the display of local or networked drives when you click My Computer.
1.Go to start->run.Type regedit.Now go to:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
Now in the right pane
create a new DWORD item and name it NoDrives (it is case sensitive).
Now modify it's value and set it to 3FFFFFF (Hexadecimal) .
Now restart your computer.
So, now when you click on My Computer, no drives will be shown(all gone...).
To enable display of drives in My Computer, simply delete this DWORD item that you created.Again restart your computer.You can now see all the drives again. Magic........lol.
1.Go to start->run.Type regedit.Now go to:
HKEY_CURRENT_USER\Software\
Now in the right pane
create a new DWORD item and name it NoDrives (it is case sensitive).
Now modify it's value and set it to 3FFFFFF (Hexadecimal) .
Now restart your computer.
So, now when you click on My Computer, no drives will be shown(all gone...).
To enable display of drives in My Computer, simply delete this DWORD item that you created.Again restart your computer.You can now see all the drives again. Magic........lol.
MAKE MOZILLA FIREFOX TEN TIMES FASTER
THIS IS A VERY SIMPLE TRICK.....NO SOFTWARE REQUIRED......NO DL REQUIRED
Unhidden
1. Type "about:config" into the address bar and hit enter. Scroll down and look for the following entries:
2. Alter the entries as follows:
Set "network.http.pipelining" to "true"
Set "network.http.proxy.pipelining" to "true"
set "network.http.pipelining.maxrequests" to some number like 30. This means it will make 30 requests at once.
3. Lastly right-click anywhere and select New-> Integer. Name it "nglayout.initialpaint.delay" and set its value to "0". This value is the amount of time the browser waits before it acts on information it recieves.
NOTE:this trick only works for broadband users not for dialup
Unhidden
1. Type "about:config" into the address bar and hit enter. Scroll down and look for the following entries:
2. Alter the entries as follows:
Set "network.http.pipelining" to "true"
Set "network.http.proxy.
set "network.http.pipelining.
3. Lastly right-click anywhere and select New-> Integer. Name it "nglayout.initialpaint.delay" and set its value to "0". This value is the amount of time the browser waits before it acts on information it recieves.
NOTE:this trick only works for broadband users not for dialup
Exiting Windows the Cool and Quick Way(2)
Normally it takes a hell lot of time just Shutting down Windows, you have to move your
mouse to the Start Button, click on it, move it again over Shut Down, click, then move it
over the necessary option and click, then move the cursor over the OK button and once
again (you guessed it) click.This whole process can be shortened by creating shortcuts on
the Desktop which will shut down Windows at the click of a button. Start by creating a
new shortcut( right click and select New> Shortcut). Then in the command line box, type
(without the quotes.)
'C:\WINDOWS\system32\logoff.exe'
mouse to the Start Button, click on it, move it again over Shut Down, click, then move it
over the necessary option and click, then move the cursor over the OK button and once
again (you guessed it) click.This whole process can be shortened by creating shortcuts on
the Desktop which will shut down Windows at the click of a button. Start by creating a
new shortcut( right click and select New> Shortcut). Then in the command line box, type
(without the quotes.)
'C:\WINDOWS\system32\logoff.
Delete the Tips of the Day to save 5KB
Windows 95 had these tips of the day which appeared on a system running a newly
installed Windows OS. These tips of the day are stored in the Windows Registry and
consume 5K of space. For those of you who are really concerned about how much free
space your hard disk has, I have the perfect trick.
To save 5K go to the following key in Regedit:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\Curr
entVersion\Explorer\Tips
Now simply delete these tricks by selecting and pressing the DEL key.
Change the Default Locations
To change the default drive or path where Windows will look for it's installation files, go
to the key:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\Curr
entVersion\Setup\SourcePath
Now you can edit as you wish.
Secure your Desktop Icons and Settings
You can save your desktop settings and secure it from your nerdy friend by playing with
the registry. Simply launch the Registry Editor go to:
HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre
ntVersion\Policies\Explorer
In the right pane create a new DWORD Value named NoSaveSettings and modify it's
value to 1. Refresh and restart for the settings to get saved.
installed Windows OS. These tips of the day are stored in the Windows Registry and
consume 5K of space. For those of you who are really concerned about how much free
space your hard disk has, I have the perfect trick.
To save 5K go to the following key in Regedit:
HKEY_LOCAL_MACHINE\Software\
entVersion\Explorer\Tips
Now simply delete these tricks by selecting and pressing the DEL key.
Change the Default Locations
To change the default drive or path where Windows will look for it's installation files, go
to the key:
HKEY_LOCAL_MACHINE\Software\
entVersion\Setup\SourcePath
Now you can edit as you wish.
Secure your Desktop Icons and Settings
You can save your desktop settings and secure it from your nerdy friend by playing with
the registry. Simply launch the Registry Editor go to:
HKEY_CURRENT_USER\Software\
ntVersion\Policies\Explorer
In the right pane create a new DWORD Value named NoSaveSettings and modify it's
value to 1. Refresh and restart for the settings to get saved.
Take Over the Screen Saver
To activate and deactivate the screen saver whenever you want, goto the following
registry key:
HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\ScreenSavers
Now add a new string value and name it Mouse Corners. Edit this new value to -Y-N.
Press F5 to refresh the registry. Voila! Now you can activate your screensaver by simply
placing the mouse cursor at the top right corner of the screen and if you take the mouse to
the bottom left corner of the screen, the screensaver will deactivate.
Pop a banner each time Windows Boots
To pop a banner which can contain any message you want to display just before a user is
going to log on, go to the key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr
entVersion\WinLogon
Now create a new string Value in the right pane named LegalNoticeCaption and enter the
value that you want to see in the Menu Bar. Now create yet another new string value and
name it: LegalNoticeText. Modify it and insert the message you want to display each
time Windows boots. This can be effectively used to display the company's private policy
each time the user logs on to his NT box. It's .reg file would be:
REGEDIT4
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr
entVersion\Winlogon]
"LegalNoticeCaption"="Caption here."
registry key:
HKEY_CURRENT_USER\Software\
Now add a new string value and name it Mouse Corners. Edit this new value to -Y-N.
Press F5 to refresh the registry. Voila! Now you can activate your screensaver by simply
placing the mouse cursor at the top right corner of the screen and if you take the mouse to
the bottom left corner of the screen, the screensaver will deactivate.
Pop a banner each time Windows Boots
To pop a banner which can contain any message you want to display just before a user is
going to log on, go to the key:
HKEY_LOCAL_MACHINE\SOFTWARE\
entVersion\WinLogon
Now create a new string Value in the right pane named LegalNoticeCaption and enter the
value that you want to see in the Menu Bar. Now create yet another new string value and
name it: LegalNoticeText. Modify it and insert the message you want to display each
time Windows boots. This can be effectively used to display the company's private policy
each time the user logs on to his NT box. It's .reg file would be:
REGEDIT4
[HKEY_LOCAL_MACHINE\SOFTWARE\
entVersion\Winlogon]
"LegalNoticeCaption"="Caption here."
Ban Shutdowns: A trick to Play on Lamers
This is a neat trick you can play on that lamer that has a huge ego, in this section I teach
you, how to disable the Shut Down option in the Shut Down Dialog Box. This trick
involves editing the registry, so please make backups. Launch regedit.exe and go to :
HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre
ntVersion\Policies\Explorer
In the right pane look for the NoClose Key. If it is not already there then create it by right
clicking in the right pane and selecting New > String Value.(Name it NoCloseKey ) Now
once you see the NoCloseKey in the right pane, right click on it and select Modify. Then
Type 1 in the Value Data Box.
Doing the above on a Win98 system disables the Shut Down option in the Shut Down
Dialog Box. But on a Win95 machine if the value of NoCloseKey is set to 1 then click on
the Start > Shut Down button displays the following error message:
This operation has been cancelled due to restrictions in effect on this computer. Please
contact your system administrator.
You can enable the shut down option by changing the value of NoCloseKey to 0 or
simply deleting the particular entry i.e. deleting NoCloseKey.
Instead of performing the above difficult to remember process, simply save the following
with an extension of .reg and add it's contents to the registry by double clicking on it.
you, how to disable the Shut Down option in the Shut Down Dialog Box. This trick
involves editing the registry, so please make backups. Launch regedit.exe and go to :
HKEY_CURRENT_USER\Software\
ntVersion\Policies\Explorer
In the right pane look for the NoClose Key. If it is not already there then create it by right
clicking in the right pane and selecting New > String Value.(Name it NoCloseKey ) Now
once you see the NoCloseKey in the right pane, right click on it and select Modify. Then
Type 1 in the Value Data Box.
Doing the above on a Win98 system disables the Shut Down option in the Shut Down
Dialog Box. But on a Win95 machine if the value of NoCloseKey is set to 1 then click on
the Start > Shut Down button displays the following error message:
This operation has been cancelled due to restrictions in effect on this computer. Please
contact your system administrator.
You can enable the shut down option by changing the value of NoCloseKey to 0 or
simply deleting the particular entry i.e. deleting NoCloseKey.
Instead of performing the above difficult to remember process, simply save the following
with an extension of .reg and add it's contents to the registry by double clicking on it.
REGEDIT4
[HKEY_CURRENT_USER\Software\
ntVersion\Policies\Explorer]
"NoClose"="1"
Disabling Display of Drives in My Computer
This is yet another trick you can play on your geek friend. To disable the display of local
or networked drives when you click My Computer go to :
HKEY_CURRENT_USER\Software\
ntVersion\Policies\Explorer
Now in the right pane create a new DWORD item and name it NoDrives. Now modify
it's value and set it to 3FFFFFF (Hexadecimal) Now press F5 to refresh. When you click
on My Computer, no drives will be shown. To enable display of drives in My Computer,
simply delete this DWORD item. It's .reg file is as follows:
REGEDIT4
[HKEY_CURRENT_USER\Software\
ntVersion\Policies\Explorer]
"NoDrives"=dword:03ffffff
Subscribe to:
Posts (Atom)